Network-technologies SM-nXm-15V-LCD Manual de usuario descargar pdf (Pagina 9)

NTI VEEMUX VIDEO MATRIX SWITCH

Connect RS232

RS232 control can be achieved using a separate user terminal or CPU with a terminal program. To make a terminal connection,

connect a serial cable (specifications on page 37) between the user terminal and the 9 pin DIN female connector on the VEEMUX

labeled "RS232". (See Figure 3)

Figure 3- Connect user terminal for RS232 control

Connect to the Ethernet

If the Telnet Interface (page 13) or Web Interface (page 14) will be used, an Ethernet connection to the Local Area Network (LAN)

must be made using CAT5 cable with RJ45 connectors. Wiring between the connectors should be straight through (pin 1 to pin

1, pin 2 to pin 2, etc.) Connect a CAT5 cable between the connector labeled "ETHERNET" and the LAN (see Figure 4).

Figure 4- Connect the LAN to the VEEMUX

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Sin comentarios

Network-technologies SM-nXm-15V-LCD Manual de usuario Pagina 9