Network-technologies Console Switch Manual de usuario descargar pdf

INSTALLATION GUIDE FOR THE

ENVIROMUX-DCVD-xxx

DC Voltage Detector

INTRODUCTION

The NTI ENVIROMUX-DCVD-xxx is a DC voltage detection contact sensor which, when connected to an ENVIROMUX-SEMS-16

or ENVIROMUX-MINI, closes when the monitored voltage is in the 26-36VDC range. The contacts will remain closed unless the

monitored voltage drops below 24VDC, at which point the contact will open. A 2-wire sensor cable (6 foot cable included), is used

to connect to an ENVIROMUX, which can be configured to send alerts based on the presence or lack of DC voltage.

Models available:

ENVIROMUX-DCVD-24V – For use with ENVIROMUX-SEMS-16

ENVIROMUX-DCVD-24VM – For use with ENVIROMUX-MINI (SEE NOTE BELOW)

Note: The ENVIROMUX-DCVD-24VM is only compatible with ENVIROMUX-MINI units made on or after 11/1/07 (see label

on the bottom of your ENVIROMUX-MINI). If your ENVIROMUX-MINI was made prior to 11/1/07, please order model

ENVIROMUX-DCVD-24V. Failure to use the correct voltage detector will result in inaccurate alert reports.

Features:

¾ Monitors the presence of 26-36VDC

¾ 2-position screw-terminal connection

¾ Supports 2-wire sensor cable up to 1000 ft

(6 foot cable included)

¾ RoHS

MATERIALS SUPPLIED

¾ ENVIROMUX-DCVD-xxx Power Monitor (xxx= 24V or 24VM)

¾ ENVIROMUX-2W-6 (6 foot 2-wire sensor cable)

¾ Installation Guide

INSTALLATION

Place the ENVIROMUX-DCVD-xxx where it can be plugged into an DC power source (26-36VDC). Connect a 2-wire cable

between the terminals on the ENIVROMUX-DCVD-xxx and the “CONTACTS” terminals on the ENVIROMUX-MINI, or the

“DIGITAL IN” terminals on the ENVIROMUX-SEMS-16

Use the chart below or see images on next page to make proper wire connections:

TERMINAL ON

ENVIROMUX-DCVD-xxx

Wire

Color

TERMINAL ON

ENVIROMUX-MINI

TERMINAL ON

ENVIROMUX-SEMS-16

White

+5V

Black

When using 2-wire cables longer than 100 ft, be careful to route cables away from AC wiring, lighting sources, electric motors, or

other electrical devices.

The wire connection terminal blocks are easily removed from the ENVIROMUX-DCVD-xxx, ENVIROMUX-MINI, and

ENVIROMUX-SEMS-16 for more convenient wire termination.

In the event that the ground terminal is unavailable, the negative terminal ( ) has the same potential and can be substituted.

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - ENVIROMUX-DCVD-xxx

1 INSTALLATION GUIDE FOR THE ENVIROMUX-DCVD-xxx DC Voltage Detector INTRODUCTION The NTI ENVIROMUX-DCVD

Pagina 2 - CONTACTS

2 Wire connections for ENVIROMUX-MINI Wire connections for ENVIROMUX-SEMS-16 +Front

Pagina 3 - View looking into RJ45 Socket

3 The ENVIROMUX-DCVD-xxx can also be connected to the “RJ45 SENSORS” sockets on the ENVIROMUX-SEMS-16. When using a CAT5 patch cable to make conne

Pagina 4

4 OPERATION The ENVIROMUX-DCVD-xxx is designed to close the circuit between the “ + “ and “ “ terminals when DC voltage is greater

Pagina 5 - (ENVIROMUX-GSM)

5 INSTALLATION NOTES • It is not necessary to install an ENVIROMUX-DCVD-xxx to monitor the DC circuit which provides power to the ENVIROMUX-SEMS-

Pagina 6

Comentarios a estos manuales

Sin comentarios

Network-technologies Console Switch Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios De Computador Network-technologies Console Switch. Network Technologies Console Switch User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Network-technologies Console Switch